We fix what's broken, fast, and we don't disappear after the invoice. Same-day appointments available across Redmond and the surrounding zip codes.
No automated menus for emergencies — a real person handles the call.
A licensed technician arrives, runs a full diagnostic, and explains exactly what's wrong in plain language.
Most repairs are completed same-visit, and we test the system before we leave to confirm it's actually holding.
Leonard HVAC didn't start as a franchise chasing volume. We invest in ongoing training so our techs recognize a failing capacitor, a cracked heat exchanger, or a refrigerant leak before it turns into an emergency.
We're not the biggest name in Redmond — we're the team that shows up in the truck, not a subcontractor we've never met. Licensing and insurance aren't optional line items for us, and we keep that documentation available on request for every job, residential or commercial.
We know which neighborhoods run on older ductwork and which subdivisions were built with newer high-efficiency systems. That local knowledge shapes the parts we stock on the truck — it's the difference between a tech who's guessing and a tech who's seen your exact situation a hundred times before.
Trust in this industry gets eroded fast, and it takes real consistency to earn it back. That's the gap we built Leonard HVAC to close. We track arrival windows, callback rates, and repeat-issue complaints internally so problems get caught before they become patterns, because a customer who trusts us once tends to call us again — and Redmond is a small enough community that reputation travels fast.
Our office team is based locally too, not routed through an out-of-state call center that's never seen a Redmond rooftop unit. Our warranty and service history records stay attached to your address, so any future technician who visits already has the full picture.
Every service below is backed by the same licensing, warranty, and upfront pricing you get on any job we run.
A dead system in the middle of a heat wave or a cold snap isn't just inconvenient — it can be a real safety issue for kids, pets, and older residents. Our Redmond dispatch team prioritizes no-heat and no-cooling calls so a technician is diagnosing your system as fast as physically possible.
If a specialty part genuinely does need to be ordered, we'll set up a safe temporary fix and give you a real timeline instead of leaving you guessing.
Not every repair call ends in a repair — sometimes the honest recommendation is a properly sized replacement. We walk Redmond homeowners through efficiency ratings and how they translate into real monthly savings before a single piece of equipment gets ordered.
Most installs in Redmond are completed in a single day, and we walk you through the new thermostat and any app controls before we leave.
Commercial equipment operates differently than a residential unit, and it needs technicians who actually understand rooftop packages and multi-zone systems. Our commercial division services light industrial and warehouse ventilation across Redmond, with priority response for facilities that can't afford downtime.
We understand that a commercial call isn't just about comfort, it's about keeping a business open.
Most emergency breakdowns start as a small, ignorable warning sign months earlier. Beyond standard tune-ups, we also handle indoor air quality upgrades for homes with allergy or asthma concerns for Redmond households that want more than just temperature control.
We'll show you photos of anything concerning we find, along with a plain-language explanation of what it means and whether it's urgent.
This is the standard every Redmond technician on our team is held to.
Details vary by job type and are always shared upfront, never buried in fine print.
If a competitor's written quote for the same scope of work is genuinely lower, ask us about it.
If anything feels off after we leave, one call gets a tech back to your Redmond address.
A little attention to how your system is running can save you a lot of money and discomfort.
Rattling during startup often means a component has worked itself loose and needs tightening before it causes real damage.
This is one of the most common complaints we hear on service calls across Redmond.
A system working harder than it should to hit the same temperature shows up directly on your utility bill.
This is one of the warning signs we recommend not waiting on.
A burning smell should never be ignored — it can indicate an electrical issue that needs immediate attention.
Repeated repairs on an aging system are usually the clearest sign that replacement will save more money than another patch job.
We explain diagnostic fees and repair estimates before authorizing work.
Emergency calls get moved to the front of the line automatically.
If something isn't right after we leave, we come back and make it right.
Every technician carries current state licensing and manufacturer training.
Photos and plain-language notes accompany every diagnostic.
We'll walk you through what's actually available before you decide.
A snapshot of the feedback that keeps us accountable.
"Our AC quit on the hottest weekend of the year and they had a tech out within a couple of hours. Fixed on the first visit and explained everything in terms I could actually understand."
"We've used them for our maintenance plan for two years now and never had a surprise breakdown. You can tell these guys actually know what they're doing."
"Explained the sizing calculation so I understood why they weren't just installing the same unit again. New system is noticeably quieter and our energy bill actually dropped."
"Our restaurant's rooftop unit went down on a Friday night and they had someone out fast. Kept our kitchen running through the weekend rush."
"I appreciated that they didn't try to sell me a bigger unit than I needed. Would use them again without hesitation."
"The tech walked me through what he was checking as he went, which I really appreciated. Genuinely relieved to have found a crew that answers when it matters."
Understanding what typically fails helps homeowners know what to watch for and when a repair call is worth making before things get worse.
Redmond's seasonal swings put real stress on a system that isn't maintained regularly. Before the coldest stretch of the year, a heating system benefits from a full safety inspection, checking the heat exchanger, ignition system, and airflow to catch any issue that could turn into a no-heat emergency.
Simple habits between professional visits also matter. None of this replaces a professional tune-up, but it does reduce the wear that leads to premature breakdowns between visits.
We also service package units common on manufactured and modular homes throughout the Redmond area. If your system was installed by a different company entirely, that's not a problem — we service equipment regardless of who originally put it in, and we'll pull the model and serial information to confirm parts compatibility before any repair begins.
Here's a look at the kind of experience that shows up at your door.
Over a decade in residential heating and cooling, with a focus on load calculations and full system replacements.
Known for fast, accurate diagnostics on no-heat and no-cool breakdowns.
Experienced with the light industrial and retail equipment common across the area.
For emergency no-heat or no-cool calls, we prioritize dispatch and aim to have a technician on-site the same day, often within a couple of hours.
Our policy is simple: you approve the number before we touch the system.
Our emergency line runs 24 hours a day, including nights, weekends, and holidays.
Yes — licensing and insurance documentation is available on request for any job, residential or commercial.
As a general guideline, if a system is past 12-15 years old and facing a costly repair, replacement often makes more financial sense.
Yes, our maintenance plans include seasonal tune-ups, priority scheduling, and discounted repair rates for members.
We cover Redmond and the surrounding communities, including the zip codes listed in our coverage section below.
Yes, we run separate residential and commercial divisions, both fully licensed and equipped for their respective equipment.
Our technicians are trained across the major residential and commercial equipment lines, not limited to a single manufacturer.
Financing options are available for qualifying replacement installations, and our team can walk you through what's currently offered.
Most Redmond homes benefit from two tune-ups a year — one before cooling season and one before heating season.
Beyond basic safety checks, it's best to leave diagnosis to a licensed technician rather than attempting a repair yourself.
Ask about current after-hours rates when you call +1-866-805-8548.
Straightforward fixes like a capacitor swap or a thermostat replacement are often finished in well under an hour.
Let dispatch know ahead of time if access will be handled differently than a standard homeowner visit.
From the older, established streets near the center of Redmond to the newer developments on the outskirts, our trucks cover the full footprint of the city.
Larger properties get the same upfront pricing and licensed technicians as a single-family service call, just coordinated at scale.
Qualifying installations can be financed through options we'll walk you through during your in-home estimate, with terms explained clearly before you commit to anything. If a rebate or local incentive program applies to your Redmond installation, our technicians will flag it during the estimate rather than leaving you to track it down after the fact.
We dispatch throughout Redmond and the neighboring communities, keeping response times tight because our trucks stay close to home.
Coverage isn't limited to a single neighborhood or subdivision — our Redmond dispatch zone stretches across the metro area and into the surrounding suburbs and unincorporated communities.
